Bending machine – Biegemaschine: WEMO Punching-Bending-System

emplacement

Fabricant

numéro de la machine

Description

This WEMO Punching-Bending-System was manufactured in the year 1992 in Germany. It is in good condition due conscientious and documented maintenance.
The machine is still in operation and can be viewed and inspected at any time. It will be delivered including accessories from operator's stock. Max. length of the parts is 2 meters and width is limited to approx. 1.10 meters. As for sheet thickness, everything between 0.5 and 1.25 mm can be processed. The Machine including roller conveyor at the end, has a length of approx. 31 meters and a width of around 16 meters (see drawing layout PDF attached below).
Additional equipment
: Machine will be sold including accessories from operater's stock

Machine Benefits
Technical Machine Benefits:
- Sheet thickness, everything between 0. 5 and 1. 25 mm can be processed
- Max. Length of the parts is 2 meters
- Width approx. 1. 10 meters (limit)

Qualitative Machine Benefits:
- Due to conscientious and documented maintenance, it is in good condition
- The machine is still in operation and can be viewed and inspected at any time

état

année de construction

Machine sous tension